AiM Solo 2 | Solo 2 DL GPS Lap Timer and Data Logger
Following the wildly successful AiM Solo lap-timer, the next generation Solo 2/Solo 2 DL offers a wide variety of updated features that further enhance driver and vehicle data acquisition. Updates such as the multi-color alarm lights, data retrieval through two satellite constellations allowing for lap time accuracy of 2/100 of a second, and automatic track mapping make the Solo 2/Solo 2 DL a more powerful alternative to many dash loggers on the market; for a fraction of the cost! Seamless integration options through RPM Pickup, CAN, or OBDII allow for endless installation possibilities into all platforms. Due to its accuracy, reliability, ease of use and installation, it is no surprise that the Solo line is recognized as the leading data device for motorsports coaches, aspiring racers, and drivers around the world.
SOLO 2 Features:
Expanded Tracks - more than 3,000 tracks around the world are available to sync via GPS with an auto-learning mode for new tracks
Improved accuracy of current and predictive lap time thanks to better GPS data
Configurable RGB color LEDs for visual comparison of lap times and shift lights
WiFi connection to PC to download data (cable recommended for CAN/OBD data)
iPhone connection for lap data review
SOLO 2 DL Features:
Easy installation - Screw/Velcro-on mounting bracket or the optional window suction cup.
Lap-time Display - SOLO 2 displays your best lap, as well as either current lap, last lap, or predictive lap.
LEDs - New color LEDs display real time whether you or advancing or receding from your last lap time.
Data Analysis - SOLO 2 records data to be downloaded and analyzed using AiM Race Studio software, one of the easier to use and powerful data software tools on the market.
iPhone connection for lap data review
Track Recognition - SOLO 2 includes a list of over 2,000 world tracks. At power up, the internal GPS in the SOLO 2 provides a location and loads the configuration for the track you're driving, while being able to learn the configuration of any tracks not included in the logger.
Performance Measures - Industry standard test measurements including 1/4 mile, 1/8 mile, and 0-60 mph, including 60' times, and trap speed can all be measured.
GPS Antenna - The internal GPS antenna provides an accurate location and track mapping capability, with a set start/finish line; eliminating the need for a track-side beacon.
AiM SmartyCam connection
- OBD Port Style Installation: Plug in the AiM OBD cable directly into your car's 16-pin OBD port (1996+ cars). The SOLO 2 can read OBD data from over 1,000 ECU types and will overlay it with the SOLO 2 GPS data. Note that many early OBDII ECUs (1996-2000) communicate too slowly to effectively use any supplied information. Only partial data will be available for your lap(s) and may not line up with track map or references. However, the OBD connection offers easier and non-permanent installation. OBD cable is included when you select the option above.
- Hardwired to CAN stream. A direct connection to the CAN network on the wiring harness offers more data and a faster data feed. Also, some cars do not provide crucial data through the standard OBD port, therefore hard-wiring the SOLO 2 directly into the CAN network is recommended. Hard-wiring into the CAN also removes the need to have the cable plugged into your OBD port 24/7. CAN cable is included with your option above and has un-terminated ends, and will need to be hardwired or soldered to your car's wiring harness.
- Single RPM pickup. For pre-OBDII cars (1900-1995). Connect to a spark plug wire or coil connector to read RPM data. The RPM cable is included when you select the option above.